Laminate Panel PDF E-mail

Amuheat Laminate Panel CARPET Floor Heating System

Overview


Carpet Floor Heating System

Purposely designed for under carpet with a quick heating response time, the 1mm thin under carpet heating panel is installed on the underlay directly beneath the carpet - perfect for retrofit and/or renovations as there are no screeds raising floor levels.

An extensive range of shapes and sizes allows flexibility for a range of room sizes and unlimited furniture layouts.


Features


  • Quick response time - within 15 minutes
  • Waterproof and not affected by carpet steam cleaning procedures or spills
  • Tough & Durable - the heating element can withstand pressures up to 100kg/cm²
  • Fully earthed and Tefzel insulated heating element
  • Maintenance free
  • Thermostatically controlled
  • Allergy friendly - produces no VOC's (Volatile Organic Compounds)
  • Healthy, produces no harmful EMR (Electro Magnetic Radiation)
  • 5 Year warranty (including DIY & Trade supply)

Technical



Application: Direct & background 1mm heating panel for installation between carpet and underlay.
Laminate Panel Construction: Pre-measured heating element sandwiched between porous polyester material. The laminate panel heating element terminates to a 6m length cold lead.
Heating Element: 1mm Self regulating single heating conductor with full earth shield, double insulated with Tefzel.
Voltage: 240 Volt AC
Output Power: From 130 - 160W/m²
Control: Programmable room or floor sensing (or a combination of both) control
Safety: IEC60335 compliant and wired into an earthed power supply connected through a RCD circuit. Safe in wet areas.
Quality: DIN EN ISO 9001:2000 standards
Approvals: UL certified & listed
Laminate Panel Warranty: 5 years




Installation



Under Carpet
Installing Amuheat Laminate Panel is easy and no special tools are required. Simply fix the carpet heating panel to the carpet underlay. Connect to any thermostats and switch the power on. Suitable for retrofit installations.
Carpet Floor Heating Installation


Solutions



Amuheat offers full-service support, working closely with specifiers, engineers, builders, electrical trades, flooring contractors and homeowners during all stages of construction including:
  • Design & specification
  • Trade co-ordination and liason
  • Technical support pre and during construction
  • Installation through a network of franchise agents across Australia
  • Post technical support for users


Trade Kits



Laminate Panel carpet floor heating kits are supplied complete for a succesful DIY & Trade install. Kits include:
  • Laminate Panel heater w/terminated cold lead
  • Element fault monitor
  • Digital programmable thermostat with built in timer & air sensor
  • Floor probe sensor
  • Installation guide
  • Free design & layout service
  • Telephonic technical & installation support

Carpet Floor Heating Range


Under Carpet Floor Heating


Downloads



   Laminate Panel Installation Guide
          (under carpet)

   Electrical Requirements for Electric Floor Heating

  Laminate Panel Floor Heating Data Specification 
          (under carpet)

   AT908 Thermostat Operating Guidelines
          (programmable thermostat with built in timer, air sensor & remote floor sensor)

   ETV1991 Thermostat Operating Guidelines
          (manual thermostat for DIN Rail mounting with remote floor sensor)



For DIY/Trade supply or professional installation enquiries, contact Amuheat Design on (02) 9114 6934 or upload your request and plans through our website.