Advantages of Floor Heating Cable Mats PDF E-mail

Advantages of Amuheat' Floor Heating Cable Mats

Amuheat’ floor heating cable mats is an economical electric floor heating system designed for use in tile adhesive beds, leveling compounds or in screed beds directly beneath tile, stone and floating floors for use as a direct or background heat source for you home or office.

Amuheat Floor Heating Cable Mats

Cable Mat is suited for renovations or new builds in living spaces such as bathrooms, kitchens, family rooms, bedrooms & laundries.

Robust Heating Cable
The floor heating cable mat consists of a thin multi-stranded heating element of copper alloy construction with a primary Fluoropolymer (Teflon) insulation sheath. A stainless steel earth braid covers the heating element with an outer sheath of insulation tested to 5000 Volt.

Unobtrusive Comfort
Amuheat floor heating cable mats design consist of zoned thermostat-controlled heating cables below the floor surface. The rising heat flow produces a comfortable indoor climate. At the same time, the concealed source of heat does not clutter rooms or walls leaving you flexible opportunities for decorations and furnishing.

Minimal Heating Expenses
Amuheat is also an attractive option from the point of operating costs. The positioning of the floor heating cable mats under the floor and the thermostatic control ensures a very high level of the economic use of energy. Compared to traditional heating, Amuheat systems use approximately 1/3 of the energy to achieve similar comfort levels. Further to this, zone heating can produce energy savings of more than 20% compared to heating both occupied and unoccupied rooms of your house.

Why Amuheat Works
Natural, noiseless, comfortable, healthy heat - Amuheat radiates warmth from the feet up to give you a more even temperature throughout the home or office. No more air movement typical with fan heaters, no more fumes typical with gas heaters.

Uncomplicated Installation
Installation of the floor heating cable mats is uncomplicated, with all the heating cable uniformly spaced on fibreglass mat with tape strips attached and cold tail connections sealed and waterproof tested at the factory for you. Simply stick the mat to the prepared floor, connect the element fault monitor to the floor heating cable mat system and the flooring can be installed immediately. The floor heating cable mats is also available in trade kits for DIY install.

More on Amuheat Floor Heating Cable Mats >